1.25G 1270-1610nm CWDM 150KM DDM SFP 光模块

1.25G SFP optical transceiver module, support 1.25Gb/s and up to 150 km transmission

Features:

Up to 1.25Gb/s Data Links
Hot-Pluggable
Duplex LC connector
Up to 150km on 9/125μm SMF
1270~1610nm CWDM DFB laser transmitter
APD Receiver
Single +3.3V Power Supply
Monitoring Interface Compliant with SFF-8472
Maximum Power <1W
Commercial operating temperature range: -0°C to 70°C Version available
RoHS compliant and Lead Free

Applications:

Metro/Access Networks
1.25 Gb/s 1000Base-EZX Ethernet
1×Fibre Channel
Other Optical Links

FSPD-03C150-XX

1.25Gb/s 150km SFP Transceiver Hot Pluggable, Duplex LC, +3.3V, 1270~1610nm, CWDM LD&APD, Single-mode, DDM

F-tone’s FSPD-03C150-XX Transceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses an APD receiver and the transmitter uses a CWDM DFB laser, up to 36dB link budge ensure this module 1000Base Ethernet 150km application.

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit
Storage Temperature	TS	-40		+85	°C
Supply Voltage	VCC	-0.5		4	V
Relative Humidity	FH	0		85	%

Recommended Operating Environment

Parameter		Symbol	Min.	Typical	Max.	Unit
Case operating Temperature	Industrial	TC	-40		85	°C
	Extended		-5		85	°C
	Commercial		0		+70	°C
Supply Voltage		VCC	3.135		3.465	V
Supply Current		Icc			300	mA
Inrush Current		Isurge			Icc+30	mA
Maximum Power		Pmax			1	W

Electrical Characteristics(TOP= -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameter	Symbol	Min.	Typical	Max.	Unit	Note
Transmitter Section:
Input differential impedance	Rin	90	100	110		
Single ended data input swing	Vin PP	250		1200	mVp-p
Transmit Disable Voltage	VD	Vcc – 1.3		Vcc	V	2
Transmit Enable Voltage	VEN	Vee		Vee+ 0.8	V
Transmit Disable Assert Time	Tdessert			10	us
Receiver Section:
Single ended data output swing	Vout,pp	250		800	mv	3
LOS Fault	Vlosfault	Vcc – 0.5		VCC_host	V	5
LOS Normal	Vlos norm	Vee		Vee+0.5	V	5
Power Supply Rejection	PSR	100			mVpp	6

Note:

1. AC coupled.

2. Or open circuit.

3. Into 100 ohm differential termination.

4. 20 – 80 %

5. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

6. All transceiver specifications are compliant with a power supply sinusoidal modulation of 20 Hz to 1.5MHz up to specified value applied through the power supply filtering network shown on page 23 of the Small Form-factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 14, 2000.

Optical Parameters(TOP= -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameter	Symbol	Min.	Typical	Max.	Unit	Note
Transmitter Section:
Center Wavelength	λc	λ-3	λ	λ+3	nm
Spectral Width	σ			1	nm
Side Mode Suppression Ratio	SMSR	30			dB
Optical Output Power	Pout	+2		+5	dBm	1
Extinction Ratio	ER	9			dB
Optical Rise/Fall Time	tr/ tf			260	ps	2
Relative Intensity Noise	FIN			-120	dB/Hz
Output Eye Mask	Compliant with IEEE802.3 z (class 1 laser safety)
Receiver Section:
Optical Input Wavelength	λc	1270		1610	nm
Receiver Overload	Pol	-7			dBm	4
FX Sensitivity	Sen			-34	dBm	4
FX_LOS Assert	LOSA	-45			dBm
FX_LOS De-assert	LOSD			-35	dBm
FX_LOS Hysteresis	LOSH	0.5			dB
General Specifications:
Data Rate	BR		1.25		Gb/s
Bit Error Rate	BER			10-12
Max. Supported Link Length on 9/125μm SMF@1.25Gb/s	LMAX		120		km
Total System Budget	LB	34			dB

Note

1. The optical power is launched into SMF.

2. 20-80%.

3. Jitter measurements taken using Agilent OMNIBERT 718 in accordance with GR-253.

4. Measured with PRBS 27-1at 10-12BER

Order Information:

Part Number	Product Description
FSPD-03C150-27	SFP, 1270nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-29	SFP, 1290nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-31	SFP, 1310nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-33	SFP, 1330nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-35	SFP, 1350nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-37	SFP, 1370nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-39	SFP, 1390nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-41	SFP, 1410nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-43	SFP, 1430nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-45	SFP, 1450nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-47	SFP, 1470nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-49	SFP, 1490nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-51	SFP, 1510nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-53	SFP, 1530nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-55	SFP, 1550nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-57	SFP, 1570nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-59	SFP, 1590nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM
FSPD-03C150-61	SFP, 1610nm CWDM, 1.25Gbps, LC, 150km, 0°C~+70°C, with DDM

工作温度：商业级/工业级/军品级可选

本产品为北亿纤通 | F-tone Networks FT-81系列产品线，详细信息，请联系我们的销售人员，谢谢！Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.

相关产品推荐