JNP-100G-4X25G-5M — Juniper JNP-100G-4X25G-5M Compatible 100G QSFP28 to 4x SFP28 DAC Breakout Cable (5m) supports 100Gbps over 26AWG passive copper in compliance with InfiniBand.
产品详情
| 产品参数 — F-tone | |||
| 瞻博兼容型号 | JNP-100G-4X25G-5M | 制造商名称 | F-tone |
| 接口类型 | QSFP28 to 4xSFP28 | 传输速率 | 100Gbps |
| 线缆长度 | 5m (16.4ft) | 线规 | AWG 26 |
| 外护套材质 | PVC(OFNR) | 最小弯曲半径 | 30mm |
| 工作温度 | 商业级/工业级/军品级可选 | 协议 | 100G Ethernet, InfiniBand EDR |
| 瞻博兼容型号 | JNP-100G-4X25G-5M | 制造商名称 | F-tone |
| 接口类型 | QSFP28 to 4xSFP28 | 传输速率 | 100Gbps |
| 线缆长度 | 5m (16.4ft) | 线规 | AWG 26 |
| 外护套材质 | PVC(OFNR) | 最小弯曲半径 | 30mm |
| 工作温度 | 商业级/工业级/军品级可选 | 协议 | 100G Ethernet, InfiniBand EDR |
Juniper JNP-100G-4X25G-5M Compatible 5m 100G QSFP28 to 4x 25G SFP28 Copper Breakout Cable (QSFP28 to SFP28 DAC Breakout Cable, Passive AWG26 5m)
The DAC breakout cables are a high-speed, cost-effective 100GbE to 4 x 25GbE Ethernet connectivity solution, designed to meet the growing needs for higher bandwidth in data centers. This cable assembly features eight differential copper pairs, providing four data transmission channels at speeds up to 28Gbps per channel, and meets 100G Ethernet, 25G Ethernet, and InfiniBand Enhanced Data Rate (EDR) requirements. Available in a broad range of wire gages from 26AWG through 30AWG.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
