HPE — HPE Aruba R9F85A Compatible 10G SFP+ ER Transceiver Module throught up to 40km over Fiber Single-Mode Fiber using a wave length of 15500nm via a LC connector.
产品详情
| 产品参数 — F-tone | |||
| HPE Aruba Compatible | R9F85A | 制造商名称 | F-tone |
| 封装 | SFP+ | 速率 | 10Gbps, 5Gbps, 2.5Gbps, 1000Mbps |
| 功耗 | 2.5W | 缆线距离 | 30m |
| 接口 | RJ-45 | 是否支持DDM | No |
| 协议 | 10G Ethernet, MSA Compliant | 工作温度 | 商业级/工业级/军品级可选 |
| HPE Aruba Compatible | R9F85A | 制造商名称 | F-tone |
| 封装 | SFP+ | 速率 | 10Gbps, 5Gbps, 2.5Gbps, 1000Mbps |
| 功耗 | 2.5W | 缆线距离 | 30m |
| 接口 | RJ-45 | 是否支持DDM | No |
| 协议 | 10G Ethernet, MSA Compliant | 工作温度 | 商业级/工业级/军品级可选 |
v Up to 10Gb/s bi-directional data links
v Hot-pluggable SFP+ footprint
v Fully metallic enclosure for low EMI
v Low power dissipation
v Compact RJ-45 connector assembly
v Access to physical layer IC via a 2-wire serial bus supports Links up to 30m using Cat 6a/7 Cable
v Fiber OpticModuleF-tone CO., LIMITED Rev 1.1 PAGE 2/5? RoHS Compliant
v 10 Gigabit Ethernet over Cat 6a/7 cable
HPE Aruba R9F85A Compatible 10G Copper SFP+ Transceiver Module (30m RJ45 without DDM)
HPE Aruba R9F85A Compatible 10G Copper SFP+ Copper Small Form Pluggable (SFP) transceivers are high-performance, cost-effective modules compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which support 10Gbps data- rate up to 30 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with an address of A0h via the 2wire serial EEPROM protocol. The physical IC can also be accessed via a 2wire serial bus at address A0h.
Product Details
Quality Assurance
Quality Certification
our advantages
-
Keep In Stock
- Fast Delivery
-
Professional Service
- Technical Support
-
Worry-Free Guarantee
- Shopping Satisfactorily
-
Premium Quality
- High stability
Rigorous Industrial ProductTesting
Optical communication products belong to industrial products,which require high stability and reliability.F-tone adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably
-
Temperature Impact
- High and low temperature cycle,aging test to ensure good temperature characteristics
-
Mechanical Impact
- Mechanicalvibration testing to ensure the stability of products
-
EMI Testing
- Excellent designand rigorous testing ensuregood EMI performance
-
MTBF Testing
- MTBF(Mean Time between Failures)testing ensure high stablility
100% 3rd Party Compatible
F-tone Compatibility Testing Center has most of the mainstream brand switches and devices.Before
shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.
- Coding(EEPROM Programming)
- Testing system
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
