MikroTik — MikroTik S-85DLC05D Compatible 1000Base SFP SX transceiver supports up to 550m link lengths over multi-mode fiber using a wave length of 850nm via an LC connector.
产品详情
| 产品参数 — F-tone | |||
| MikroTik Compatible | S-85DLC05D | 制造商名称 | F-tone |
| 封装 | SFP | 传输速率 | 1.25Gbps |
| 波长 | 850nm | 最远传输距离 | 550m over OM2 MMF |
| 接口类型 | 双工 LC | 发射激光器类型 | 850nm VCSEL |
| 线缆类型 | 多模(MMF) | 光接收器件类型 | PIN |
| 发射光功率 | -9.0~0dBm | 接收灵敏度 | < -18.0dBm |
| 协议 | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | 工作温度 | 商业级/工业级/军品级可选 |
| MikroTik Compatible | S-85DLC05D | 制造商名称 | F-tone |
| 封装 | SFP | 传输速率 | 1.25Gbps |
| 波长 | 850nm | 最远传输距离 | 550m over OM2 MMF |
| 接口类型 | 双工 LC | 发射激光器类型 | 850nm VCSEL |
| 线缆类型 | 多模(MMF) | 光接收器件类型 | PIN |
| 发射光功率 | -9.0~0dBm | 接收灵敏度 | < -18.0dBm |
| 协议 | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | 工作温度 | 商业级/工业级/军品级可选 |
v Supports up to 10.7Gbps bit rates
v Single +3.3V power supply
v 1310nm FP laser and PIN photo detector, Up to 10km for SMF transmission
v Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
v Compatible with RoHS
v Real-Time Digital Diagnostic Monitoring
v 1.25Gbps Optical systems
v 10GBASE-LW at 9.953Gbps
v 1.063Gbps Fiber Channel
MikroTik S-85DLC05D Compatible 1000Base SFP SX Transceiver Module (850nm MMF 550m LC DDM)
The 1000Base SFP SX transceivers are high-performance, cost-effective modules supporting a data rate of 1.25Gbps and 550m transmission distance and support up to 550m link lengths over LC duplex MMF fiber. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface cards (NICs), etc.
Quality Assurance
Quality Certification
our advantages
-
Keep In Stock
- Fast Delivery
-
Professional Service
- Technical Support
-
Worry-Free Guarantee
- Shopping Satisfactorily
-
Premium Quality
- High stability
Rigorous Industrial ProductTesting
Optical communication products belong to industrial products,which require high stability and reliability.F-tone adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably
-
Temperature Impact
- High and low temperature cycle,aging test to ensure good temperature characteristics
-
Mechanical Impact
- Mechanicalvibration testing to ensure the stability of products
-
EMI Testing
- Excellent designand rigorous testing ensuregood EMI performance
-
MTBF Testing
- MTBF(Mean Time between Failures)testing ensure high stablility
100% 3rd Party Compatible
F-tone Compatibility Testing Center has most of the mainstream brand switches and devices.Before
shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.
- Coding(EEPROM Programming)
- Testing system
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
