- Up to 1×64 Mechanical Optical Switch
- Unmatched Low Cost
- Low Optical Distortions
- High Isolation
- High Reliability
- Epoxy-Free Optical Path
1×12/1×16/1X32/1X64 机械式光开关器件
1xN multichannel optical switch is based on step motor drives designed, and it is widely used in OADM, OXC, system monitoring and so on. Based on the special optical design, it features excellent optical characteristics with fast switch time, low insertion loss, and high reliability. Moreover, because of its compact structure and small volume, it easy to be integrated with high density in the optical fiber communication system.
Specifications
|
Parameters |
Unit |
Specifications |
|
Operating Wavelength |
nm |
1260~1620 for SM, 850~1300 for MM |
|
Insertion Loss |
dB |
≤1.0（typical：0.8） |
|
Wavelength Dependent Loss |
dB |
≤0.25 |
|
Temperature Dependent Loss |
dB |
≤0.2 |
|
Polarization Dependent Loss |
dB |
≤0.05 |
|
Return Loss |
dB |
SM≥50, MM≥30 |
|
Crosstalk |
dB |
SM≥55, MM≥50 |
|
Repeat ability |
dB |
≤±0.02 |
|
Switch Time |
ms |
≤8 (adjacent channel) |
|
Durability |
times |
≥10 billion |
|
Operating Voltage |
V |
5.0 |
|
Optical Power |
mw |
≤500 |
|
Operating Temperature |
℃ |
-5~+70 |
|
Storage Temperature |
℃ |
-40~+85 |
|
Operating Humidity |
℃ |
5~95 |
|
Dimension |
mm |
2<N≤16 (120×40×32) |
|
17≤N≤32(120×50×50 or 114x110x32) |
||
|
33≤N≤64(120×110×78) |
||
|
Note: 1.Within operating temperature and all SOP. 2.Excluding connector,and add 0.3dB IL for a pair of connectors. |
||
Optical Route
Pin Configurations
DB9(TTL level):
|
NO. |
In/Out/Power |
Definition |
Instruction |
|
1 |
In |
D0 |
DB(Data Bit). D3~D0 is binary number, and D3 is high-order, D0 is low-order. They are maximum control sixteen channel, and 0000b means channel 1; 1111b means channel 16. |
|
2 |
In |
D1 |
|
|
3 |
In |
D2 |
|
|
4 |
In |
D3 |
|
|
5 |
In |
/Reset |
Low level reset to channel 0, and high level is valid. |
|
6 |
Out |
/Ready |
Low level ready to reset or receive data. |
|
7 |
Out |
Error |
High level means running error. |
|
8 |
Power |
GND |
Earth |
|
9 |
Power |
DC 5V |
DC 5V，1.0A source |
DB15(TTL level)
|
NO. |
In/Out/Power |
Definition |
Instruction |
|
2 |
In |
D0 |
DB(Data Bit). D5~D0 is binary number, and D5 is high-order, D0 is low-order. They are maximum control sixty-four channel, and 000000b means channel 1; 111111b means channel 64. |
|
3 |
In |
D1 |
|
|
4 |
In |
D2 |
|
|
5 |
In |
D3 |
|
|
6 |
In |
D4 |
|
|
10 |
In |
D5 |
|
|
11 |
In |
/Reset |
Low level reset to channel 0, and high level is valid. |
|
7 |
Out |
/Ready |
Low level ready to reset or receive data. |
|
8 |
Out |
Error |
High level means running error. |
|
15 |
Power |
5v |
Digital circuit source |
|
12 |
Power |
5v |
Step motor source |
|
1,9 |
Power |
GND |
Earth |
|
13,14 |
Free |
||
Dimension
1XN (2<N≤16): 120×40×32
1×N（17≤N≤32）：120×50×50 or 114x110x32
1×N（33≤N≤64）：120×110×78
Ordering Information：FT-1xN-A-B-C-D-E-F
|
A |
B |
C |
D |
E |
F |
|
Channel number |
Test Wavelength |
Fiber Type |
Fiber Dimension |
Fiber Length |
Connector |
|
1~N |
850: 850nm |
SM: Single Mode |
025: Φ0.25mm |
05: 0.5m |
00: None |
|
1310: 1310nm |
M1: Multi-mode 50/125 |
09: Φ0.9mm |
10: 1.0m |
FP: FC/UPC |
|
|
1550: 1550nm |
M2: Multi-mode 62.5/125 |
X: other |
15: 1.5m |
FA: FC/APC |
|
|
D: 1310/1550nm |
X: other |
X: other |
SP: SC/UPC |
||
|
X: other |
SA: SC/APC |
||||
|
LP: LC/UPC |
|||||
|
LA: LC/APC |
|||||
|
X: other |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks FT-81系列产品线，详细信息，请联系我们的销售人员，谢谢！Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.
