产品特点
- 高强度工程塑料外壳
- 抗老化能力强
- 优良的密封性能
- 承受振动、冲击、电缆拉伸变形和强烈温度变化等恶劣条件
- 不需要特殊工具，易于安装和打开复制品。
- 采用可重复使用的部件开启密封，以保证良好的气密防水性能。
- 配备相关光纤托盘和熔接保护套
- 适用范围：架空、直埋、壁挂、管道安装
- 使用温度：-40℃～65℃
- 大气压力：70～106KPa
- 抗拉力：＞1000N
- 绝缘电阻：＞2×104MΩ
- 耐压力：＞2000N/10cm2压力，时间1分钟
- 介电强度：15KV (DC)/1 分钟跳火，无飞弧。
- 光缆进出线数量：4（1个椭圆口，3个圆形口）
- 束状纤维数量：12
- 外壳密封：硅橡胶
- 入口/出口密封：热缩管
- 长度：435 毫米，直径：190 毫米
- 重量：2.6公斤
垂直（圆顶）光纤熔接盒采用优质工程塑料制成。Fiber-Mart.COM 为垂直/圆顶光纤熔接盒提供不同的端口类型、配件和不同的光纤芯数。 垂直光纤接头盒的主要应用是有线电视、电信和光纤网络。 它们适用于保护直通和分支应用中的光纤接头，可用于架空、管道和直埋光缆项目。
| Outside dimension (LxD) | 435mm×190mm |
| Weight (excluding outside box) | 2350g-2600g |
| Number of inlet/outlet ports | one oval and three round |
| Diameter of fiber cable | Φ8mm – Φ25 mm |
| Capacity of FOSC | Bunchy: 12—96(fibers) |
| Ribbon: 288(fibers) |
|
No. |
Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Internal diameter: |
| 355 ×150(mm) | ||||
| 2 | Fiber optic splice tray (FOST) | Max. 6 trays (bunchy) Max. 4 trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces) |
| 3 | Fiber holding tray | 1 pcs | Holding fibers with protective coat | |
| 4 | Foundation | 1 set | Fixing fiber cable, reinforced core and FOST | |
| 5 | Base | 1 set | Fixing internal and external structure | |
| 6 | Seal fitting | 1pieces | Sealing between FOSC cover and base | |
| 7 | Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| 8 | Earthing deriving device | 1 set | Deriving metallic parts of fiber cable in FOSC for earthing connection | Configuration as per requirement |
|
No. |
Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Protecting fiber splices | Configuration as per capacity | |
| 2 | Nylon tie | Fixing fiber with protective coat | Configuration as per capacity | |
| 3 | Heat shrinkable fixing sleeve (single) | Fixing and sealing single fiber cable | Configuration as per requirement | |
| 4 | Seal tape | Fixing and sealing mass of fiber cable | Configuration as per specification | |
| 5 | Branching clip | Branching fiber cables | Configuration as per requirement | |
| 6 | Earthing wire | 1 piece | Putting through between earthing devices | |
| 7 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air | |
| 8 | Labeling paper | 1 piece | Labeling fiber | |
| 9 | Special wrench | 1 pieces | Tightening nut of reinforced core | |
| 10 | Metal hoop | 1 set | For wall mounting and pole hugging | |
| 11 | Buffer tube | To be decided by customers | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
| 12 | Aluminum-foil paper | 1 piece | Protect the bottom of FOS |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks 产品线，详细信息，请联系我们的销售人员，谢谢！ Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. rther details are available from any Andxe System sales representative.
