产品特点
- 1. 可安装36根1.5 SC/PC尾纤
- 2 适用于最大配比2:32或2*2:16的PLC分路器。
- 3. 该型号有四个小圆口和一个大圆口。
- 4. SC适配器最大数量为36个。 （可定制其他类型的适配器）。
- 5 密封件采用硫化橡胶制成。
- 6 密封方式采用螺杆加压，密封性能优良，重新开启方便，特别适合光分路器使用。
- 7 采用高强度、耐腐蚀的改性PP材料，使瓶盖具有更长的使用寿命和优异的密封性能。
- 8. 软光缆有多种密封附件可供选择
- 使用温度：-40℃～65℃
- 大气压力：70～106KPa
- 抗拉力：＞1000N
- 耐压力：＞2000N/10cm2压力，时间1min
- 绝缘电阻：＞2×104MΩ
- 介电强度：15KV (DC)/1 分钟跳火，无飞弧。
- 适用于PLC分路器
- 全机械密封结构
- IP安全等级为IP68
- 密封方式采用螺杆压力
- 该型号适用于不同的分支连接方式，包括未切割光缆的分支。
- 可用于架空、抱杆、壁挂、地下安装。
- 该型号密封性能优良，安装方便，适用范围广，是光纤连接设备的首选。
- 光纤数量：96
- 长度：420 毫米，直径：190 毫米
- 重量：3.5公斤
FT-S018型光纤熔接盒（FOSC）是圆顶盒系列中的一员，该产品采用全机械密封结构，仅采用硅橡胶密封垫片即可保证直径13mm以内的光缆具有良好的密封性能。 该产品的功能是在光传输链路中，提供直通、分支连接及相关的连接保护。
注：此光纤接头盒属于光纤分路器类型，费用不包括光纤适配器，但我们为客户提供，请联系 sale@fibre-mart.com
| Outside dimension (LxD) | 420mm×190mm |
| Weight (excluding outside box) | 2300g-2500g |
| Number of inlet/outlet ports | 5 |
| Diameter of fiber cable | Φ8mm – Φ25mm |
| Capacity of FOSC | Bunchy: 24—96(fibers) |
| Ribbon: 144(fibers) |
|
No. |
Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Internal diameter: |
| 355 ×150(mm) | ||||
| 2 | Fiber optic splitter | 2 trays for 1×16, 3 trays for 1×32 | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: 24 cores |
| 3 | Fiber holding tray | 1 pcs | Holding fibers with protective coat | |
| 4 | Foundation | 1 set | Fixing fiber cable, reinforced core and FOST | |
| 5 | Base | 1 set | Fixing internal and external structure | |
| 6 | Seal fitting | 1pieces | Sealing between FOSC cover and base | |
| 7 | Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| 8 | Earthing deriving device | 1 set | Deriving metallic parts of fiber cable in FOSC for earthing connection | Configuration as per requirement |
|
No. |
Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Protecting fiber splices | Configuration as per capacity | |
| 2 | Nylon tie | Fixing fiber with protective coat | Configuration as per capacity | |
| 3 | Heat shrinkable fixing sleeve (single) | Fixing and sealing single fiber cable | Configuration as per requirement | |
| 4 | Seal tape | Fixing and sealing mass of fiber cable | Configuration as per specification | |
| 5 | Branching clip | Branching fiber cables | Configuration as per requirement | |
| 6 | Earthing wire | 1 piece | Putting through between earthing devices | |
| 7 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air | |
| 8 | Labeling paper | 1 piece | Labeling fiber | |
| 9 | Special wrench | 1 pieces | Tightening nut of reinforced core | |
| 10 | Metal hoop | 1 set | For wall mounting and pole hugging | |
| 11 | Buffer tube | To be decided by customers | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
| 12 | Aluminum-foil paper | 1 piece | Protect the bottom of FOS |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks 产品线，详细信息，请联系我们的销售人员，谢谢！ Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. rther details are available from any Andxe System sales representative.
