1、配备2.8英寸真彩液晶触摸屏，可实时显示剥纤温度、剥纤长度、剥纤次数检测及用户帮助等参数信息； 2、用户可通过触摸屏在0-58毫米范围内根据要求任意设定剥线长度，减少电机空程，有效提高用户的剥线效率； 3、本机通过更换光纤夹具即可剥除包层直径60um-800um范围内的所有标准单芯光纤，光纤夹具更换简单方便； 4、用户可根据光纤涂覆材料的不同，通过触摸屏在60℃-120℃温度范围内任意设定合适的剥纤温度，保证剥纤质量； 5、剥线刀片根据单芯光纤的特点，采用独特的导向斜角设计，保证光纤切口平整，不损伤光纤。 经久耐用，更换刀片方便，调整简单； 6、机器采用纵向自动剥线方式，光纤剥线受力均匀，剥线质量高，性能稳定，剥线一致性好； 7、本机采用进口高精度导轨和日本进口高精度电机。 电机噪音低，运行稳定，有效提升用户体验。 光纤热剥离装置设计具有体积小、重量轻、使用方便可靠、纵向剥离、剥离力小、剥离光纤质量高； 刀片，耐用，更换方便， 采用直线轴承导轨和热剥离，保证光纤不损伤、涂层易剥离、剥离速度快等。
Fiber cladding diameter
Fiber coating diameter
Coating strip length
Optical fiber fixing method
Customized Fixture(According to Fiber Diameter)
Using the adapter to DC12V power conversion
198.5(L) X 86(D) X 111.5(H) mm
Environmental requirements
The temperature of 0-40 DEG C below 85%
|
Specification |
|
|
Fiber cladding diameter |
60um ~ 800um |
|
Fiber coating diameter |
100μm-1000μm |
|
Coating strip length |
Max 60mm |
|
Heating mode |
Cover Heating |
|
Always heating |
|
|
Temperature setting |
60℃~120℃ Adjustable |
|
Optical fiber fixing method |
Customized Fixture(According to Fiber Diameter) |
|
Power supply mode |
Using the adapter to DC12V power conversion |
|
Size |
198.5(L) X 86(D) X 111.5(H) mm |
|
Weight |
1600g |
|
Environmental requirements |
The temperature of 0-40 DEG C below 85% |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks 产品线，详细信息，请联系我们的销售人员，谢谢！ Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. rther details are available from any Andxe System sales representative.
