产品特点
- 输入功率：-20~+6dBm
- 典型输入功率：-2dBm
- 高性能双插拔电源：110V/220V混合48V
- 完善的网管接口：以太网、RS-485、RS-232接口
- 支持Telnet和SNMP网络管理
- 高精度AGC和APC电路：典型功率控制精度为±0.05dB
- 高精度ATC电路：典型温控精度＜±0.1℃
- 高稳定性和可靠性：MTBF＞150000小时
- 所有性能均符合 BellcoreGR-1312-CORE 要求
- 智能温控系统：采用专用温控芯片，使散热和功耗比竞争对手降低30%
SOA光纤放大器设计，用于1310波段信号放大，透明传输协议， 适用于高速信号放大（10Gbps）等。稳定的SOA Pump光学激光器和独特的ATC（自动温度控制） 其关键部件采用APC（自动功率控制）电路，保证输出功率的高稳定性和可靠性。
| Parameter | Symbol | Min | Typ | Max | Unit |
| Operating Wavelength | λc | 1290 | 1310 | 1330 | nm |
| Saturated output power（1） | Po | —— | —— | 8 | dBm |
| Input Power | Pi | -20 | -2 | 6 | dBm |
| Gain | G | —— | 10 | 10 | dB |
| Noise Figure | NF | —— | 6 | 8 | dB |
| Output Power Stability | ΔPo | —– | ±0.05 | ±0.1 | dB |
| Input Isolation | ISOi | 30 | ——- | —— | dB |
| Output Isolation | ISOo | 30 | ——- | —— | dB |
| Return Loss | RL | ——- | ——- | -45 | dB |
| Polarization Dependent Gain | PDG | —— | ——- | 0.3 | dB |
| PMD | PMD | —— | ——- | 0.5 | ps |
| Parameter | Symbol | Min | Typ | Max | Unit |
| Operation Temperature | Tw | -5 | —– | 60 | ℃ |
| Storage Temperature | Ts | -40 | —– | 80 | ℃ |
| Humidity(2) | —— | 10 | —— | 85 | % |
| Parameter | Symbol | Min | Typ | Max | Unit |
| Power Voltage | Vps | 85/170 | 110/220 | 132/264 | VAC |
| Power Consumption | P | —– | —– | 18 | W |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks 产品线，详细信息，请联系我们的销售人员，谢谢！ Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. rther details are available from any Andxe System sales representative.
