QSFP28-100G-AOC-30M — F-tone QSFP28-100G-AOC-30M is a 100G QSFP active optical cable (AOC) that supports 70m over OM3 and 100m over OM4 for high bandwidth and data rate.
产品详情
| 产品参数 — F-tone | |||
| F-tone型号 | QSFP28-100G-AOC-30M | 制造商名称 | F-tone |
| 接口类型 | QSFP28 to QSFP28 | 传输速率 | 100Gbps |
| 线缆长度 | 30m (98.4ft) | 光纤线缆 | OM3 MMF |
| 外护套材质 | OFNP | 最小弯曲半径 | 7.5mm |
| 工作温度 | 商业级/工业级/军品级可选 | 协议 | 40G/100G Ethernet, Infiniband EDR |
| F-tone型号 | QSFP28-100G-AOC-30M | 制造商名称 | F-tone |
| 接口类型 | QSFP28 to QSFP28 | 传输速率 | 100Gbps |
| 线缆长度 | 30m (98.4ft) | 光纤线缆 | OM3 MMF |
| 外护套材质 | OFNP | 最小弯曲半径 | 7.5mm |
| 工作温度 | 商业级/工业级/军品级可选 | 协议 | 40G/100G Ethernet, Infiniband EDR |
v 4 channels full-duplex transceiver modules
v Supports 100Gbps total data rate
v Transmission data rate up to 28.05Gbps per channel
v Single 3.3V power supply
v 4 channels PIN photo detector array
v Low power consumption <3.5W
v Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF Single MPO connector receptacle
v Supports IEEE 802.3bm 100GBASE SR4, Infiniband EDR, Fibre Channel, and 40G/100G Ethernet
30m 100G QSFP28 Active Optical Cable (QSFP28 to QSFP28 AOC Cable, Active OM3 30m)
100G QSFP28 to QSFP28 AOC Cable is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ AOC for 100 Gigabit Ethernet and Infiniband EDR Applications. 100G AOC is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25.78125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber.
Quality Assurance
Quality Certification
our advantages
-
Keep In Stock
- Fast Delivery
-
Professional Service
- Technical Support
-
Worry-Free Guarantee
- Shopping Satisfactorily
-
Premium Quality
- High stability
Rigorous Industrial ProductTesting
Optical communication products belong to industrial products,which require high stability and reliability.F-tone adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably
-
Temperature Impact
- High and low temperature cycle,aging test to ensure good temperature characteristics
-
Mechanical Impact
- Mechanicalvibration testing to ensure the stability of products
-
EMI Testing
- Excellent designand rigorous testing ensuregood EMI performance
-
MTBF Testing
- MTBF(Mean Time between Failures)testing ensure high stablility
100% 3rd Party Compatible
F-tone Compatibility Testing Center has most of the mainstream brand switches and devices.Before
shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.
- Coding(EEPROM Programming)
- Testing system
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
