- Low insertion loss
- High Extinction Ratio
- High channel isolation
- High stability and reliability
Polarization Maintaining CWDM Components
F-tone can support there port Polarization Maintaining CWDM (PM CWDM) Components, wavelength is 1270nm to 1610nm, channel spacing is 20nm. The PM CWDM Components are characterized with low IL, high return loss, high extinction ratio and excellent environmental stability and reliability, so great used in CWDM network, and high speed communication system and instrumentation .
Specifications
|
Parameter |
Unit |
CWDM |
|
Operating Wavelength |
nm |
1270~1610nm |
|
Center Wavelength Accuracy |
nm |
± 0.5 |
|
Channel Spacing |
GHz |
20nm |
|
Channel Pass band (@-0.5dB bandwidth) Min.) |
nm |
>13 |
|
Pass Channel Insertion Loss |
dB |
≤0.9 |
|
Reflection Channel Insertion Loss |
dB |
≤0.6 |
|
Channel Ripple |
dB |
< 0.3 |
|
Pass Channel Isolation |
dB |
>30 |
|
Reflection Channel Isolation (Non-adjacent) |
dB |
>15 |
|
Extinction Ratio @ 23℃ |
dB |
> 20 |
|
Directivity |
dB |
>55 |
|
Return Loss |
dB |
>45 |
|
Maximum Power Handling |
mW |
300 |
|
Fiber Type |
– |
PM Panda Fiber |
|
Operating Temperature |
°C |
0 ~+65 |
|
Storage Temperature |
°C |
-40 ~+85 |
|
Package Dimension |
mm |
Φ5.5 x L35 |
1. Above specifications are for device without connector, and the PM WDM device is both axis working. All parameters are tested at room temperature.
2. For devices with connectors, IL will be 0.3dB higher, FL will be 5dB lower and ER will be 2dB lower. Power transmits through the connector less than 2W. The default connector key is aligned to slow axis.
3. For >10W high power applications, we will use heat sink package, contact F-tone for details.
4. If there is pulse application, please be sure to inform us of pulse energy and peak power.
5. 1XN PM CWDM module is also available, please contact F-tone.
Package Information
PM CWDM Component
Order Information
|
PMC- |
-Channel- |
-Package |
Connector- |
Pigtails Diameter |
Fiber Length |
Working Axis |
|
27:1270nm |
S: steel tube |
01U/A: LC/UPC or LC/APC |
25:250μm bare fiber |
05:0.5m |
B：Both axis working |
|
|
29:1290nm |
X: others |
02U/A: SC/UPC or SC/APC |
90:900μm Loose Tube |
10:1.0m |
||
|
…. |
03U/A: FC/UPC or FC/APC |
XX: Others |
15:1.5m |
|||
|
61:1610nm |
04U/A: others |
XX: Others |
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
Part Number Example: PMC-27-S-01A-90-10-B
Description: Polarization Maintaining CWDM, 1270nm, LC/APC all ports, 0.9mm 1.0m fiber, Steel tube,Both axis working.
If you need to customize other specifications, please provide detailed description for your requirement, and contact us by email: sales@F-tone.com
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks FT-81系列产品线，详细信息，请联系我们的销售人员，谢谢！Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.
