OSFP-800G-2LR4 — F-tone OSFP-800G-2LR4 OSFP 2x400G LR4 Transceiver supports 10km transmission distance over SMF with four CWDM lanes MUX/DEMUX design for 800G Ethernet.
产品详情
| 产品参数 — F-tone | |||
| F-tone型号 | OSFP-800G-2LR4 | 制造商名称 | F-tone |
| 封装 | OSFP | 传输速率 | 850Gbps(8x 106.25Gbps) |
| 波长 | 1271nm, 1291nm, 1311nm, 1331nm | 最远传输距离 | 10km |
| 调制技术 | PAM4 | 设备要求 | FEC |
| 接口类型 | Dual CS | 电压 | 3.3V |
| 线缆类型 | 单模(SMF) | 是否支持DDM | Yes |
| 发射激光器类型 | CWDM4 EML | 光接收器件类型 | PIN |
| 发射光功率 | -2.7~+5.1dBm | 接收灵敏度 | <-9dBm |
| 工作温度 | 商业级/工业级/军品级可选 | 最大功耗 | < 16.0W |
| 协议 | CMIS Rev 5.0, IEEE P802.3ck and IEEE 802.3cu | 应用 | 800G Ethernet, Data Center Interconnect, Infiniband Interconnects |
| F-tone型号 | OSFP-800G-2LR4 | 制造商名称 | F-tone |
| 封装 | OSFP | 传输速率 | 850Gbps(8x 106.25Gbps) |
| 波长 | 1271nm, 1291nm, 1311nm, 1331nm | 最远传输距离 | 10km |
| 调制技术 | PAM4 | 设备要求 | FEC |
| 接口类型 | Dual CS | 电压 | 3.3V |
| 线缆类型 | 单模(SMF) | 是否支持DDM | Yes |
| 发射激光器类型 | CWDM4 EML | 光接收器件类型 | PIN |
| 发射光功率 | -2.7~+5.1dBm | 接收灵敏度 | <-9dBm |
| 工作温度 | 商业级/工业级/军品级可选 | 最大功耗 | < 16.0W |
| 协议 | CMIS Rev 5.0, IEEE P802.3ck and IEEE 802.3cu | 应用 | 800G Ethernet, Data Center Interconnect, Infiniband Interconnects |
OSFP-800G-2LR4 OSFP 2x400G LR4 Optical Transceiver Module ((1271nm 1291nm 1311nm 1331nm Dual CS SMF 10km DDM)
OSFP 2x400G LR4 transceiver modules are designed for 800G Gigabit Ethernet links over 10km of single-mode fiber. The module has 8 independent channels of electrical input/output, each operating at up to 106.25Gbps. This transceiver consists of two transmitter/receiver units, with each operating on a set of 4 wavelengths on the ITU G.694.2 CWDM grid near 1300nm. The module’s transmitter path contains a bidirectional PAM4 re-timer ASIC integrating an 8-channel modulator driver, 8 externally modulated lasers, and two optical multiplexers. On the receiver path, two optical demultiplexers are coupled to eight photodiodes and two 4-channel TIA arrays, as well as a PAM4 re-timer. The electrical interface of the module complies with the 800GAUI-8 interface defined by IEEE 802.3ck and complies with OSFP MSA.
Quality Assurance
Quality Certification
our advantages
-
Keep In Stock
- Fast Delivery
-
Professional Service
- Technical Support
-
Worry-Free Guarantee
- Shopping Satisfactorily
-
Premium Quality
- High stability
Rigorous Industrial ProductTesting
Optical communication products belong to industrial products,which require high stability and reliability.F-tone adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably
-
Temperature Impact
- High and low temperature cycle,aging test to ensure good temperature characteristics
-
Mechanical Impact
- Mechanicalvibration testing to ensure the stability of products
-
EMI Testing
- Excellent designand rigorous testing ensuregood EMI performance
-
MTBF Testing
- MTBF(Mean Time between Failures)testing ensure high stablility
100% 3rd Party Compatible
F-tone Compatibility Testing Center has most of the mainstream brand switches and devices.Before
shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.
- Coding(EEPROM Programming)
- Testing system
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
