FQ-40G-ER4+
40Gb/s ER4+ 60km QSFP+ Transceiver Hot Pluggable, Duplex LC Connector, Single mode
Features:
- 4 CWDM lanes MUX/DEMUX design
- Up to 11.2Gbps per channel bandwidth
- Aggregate bandwidth of > 40Gbps
- Duplex LC connector
- Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4+
- QSFP MSA compliant
- APD photo-detector
- Up to 60 km transmission
- Compliant with QDR/DDR InfiniBand data rates
- Single +3.3V power supply operating
- Built-in digital diagnostic functions
- Temperature range 0°C to 70°C
- RoHS Compliant Part
Applications:
- Rack to rack
- Data centers Switches and Routers
- Metro networks
- Switches and Routers
- 40G BASE-ER4+
40G QSFP+ ER4+ 60km DDM Optical Transceiver
The FQ-40G-ER4+ is a transceiver module designed for 60km optical communication applications. The design is compliant to 40GBASE-ER4+ of the IEEE P802.3ba standard. The module converts 4 inputs channels of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission.
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
|
Storage Temperature |
TS |
-40 |
|
+85 |
°C |
|
SupplyVoltage |
VCCT, R |
-0.5 |
|
4 |
V |
|
RelativeHumidity |
FH |
0 |
|
85 |
% |
Recommended Operating Environment:
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
|
CaseoperatingTemperature |
TC |
0 |
|
+70 |
°C |
|
Supply Voltage |
VCCT, R |
+3.13 |
3.3 |
+3.47 |
V |
|
Supply Current |
ICC |
|
|
1000 |
mA |
|
Power Dissipation |
PD |
|
|
3.5 |
W |
Electrical Characteristics (TOP= 0 to 70 °C, VCC= 3.13 to 3.47 Volts)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
|
Data Rate per Channel |
|
– |
10.3125 |
11.2 |
Gbps |
|
|
Power Consumption |
|
– |
2.5 |
5 |
W |
|
|
Supply Current |
Icc |
|
0.75 |
1.3 |
A |
|
|
Control I/O Voltage-High |
VIH |
2.0 |
|
Vcc |
V |
|
|
Control I/O Voltage-Low |
VIL |
0 |
|
0.7 |
V |
|
|
Inter-Channel Skew |
TSK |
|
|
150 |
Ps |
|
|
FESETL Duration |
|
|
10 |
|
Us |
|
|
FESETL De-assert time |
|
|
|
100 |
ms |
|
|
Power On Time |
|
|
|
100 |
ms |
|
|
Transmitter |
||||||
|
Single Ended Output Voltage Tolerance |
|
0.3 |
|
4 |
V |
1 |
|
Common mode Voltage Tolerance |
|
15 |
|
|
mV |
|
|
Transmit Input Diff Voltage |
VI |
150 |
|
1200 |
mV |
|
|
Transmit Input Diff Impedance |
ZIN |
85 |
100 |
115 |
|
|
|
Data Dependent Input Jitter |
DDJ |
|
0.3 |
|
UI |
|
|
Receiver |
||||||
|
Single Ended Output Voltage Tolerance |
|
0.3 |
|
4 |
V |
|
|
Rx Output Diff Voltage |
Vo |
370 |
600 |
950 |
mV |
|
|
Rx Output Rise and Fall Voltage |
Tr/Tf |
|
|
35 |
ps |
1 |
|
Total Jitter |
TJ |
|
0.3 |
|
UI |
|
Note:
1. 20～80%
Optical Parameters (TOP = 0 to 70°C, VCC = 3.0 to 3.6 Volts)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Ref. |
|
Transmitter |
||||||
|
Wavelength Assignment |
L0 |
1264.5 |
1271 |
1277.5 |
nm |
|
|
L1 |
1284.5 |
1291 |
1297.5 |
nm |
|
|
|
L2 |
1304.5 |
1311 |
1317.5 |
nm |
|
|
|
L3 |
1324.5 |
1331 |
1337.5 |
nm |
|
|
|
Side-mode Suppression Ratio |
SMSR |
30 |
– |
– |
dB |
|
|
Total Average Launch Power |
PT |
|
– |
10.5 |
dBm |
|
|
Average Launch Power, each Lane |
|
+2 |
– |
7 |
dBm |
|
|
Transmit OMA per Lane |
TxOMA |
0.3 |
|
5.0 |
dBm |
|
|
Difference in launch power between any two lanes (OMA) |
|
|
|
4.7 |
dBm |
|
|
Transmitter Dispersion Penaltyeach Lane |
TDP |
|
|
2.6 |
dB |
|
|
Extinction Ratio |
ER |
5.5 |
6.5 |
|
dB |
|
|
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} |
|
{0.25, 0.4, 0.45, 0.25, 0.28, 0.4} |
|
|
|
|
|
Optical Return Loss Tolerance |
|
– |
– |
20 |
dB |
|
|
Average Launch Power OFF Transmitter, each Lane |
Poff |
|
|
-30 |
dBm |
|
|
Relative Intensity Noise |
Rin |
|
|
-128 |
dB/HZ |
1 |
|
Optical Return Loss Tolerance |
|
– |
– |
12 |
dB |
|
|
Receiver |
||||||
|
Damage Threshold |
THd |
-3 |
|
|
dBm |
1 |
|
Average Power at Receiver Input, each Lane |
R |
-23 |
|
-6 |
dBm |
|
|
Receive Electrical 3 dB upper Cut off Frequency, each Lane |
|
|
|
12.3 |
GHz |
|
|
FSSI Accuracy |
|
-2 |
|
2 |
dB |
|
|
Receiver Reflectance |
Rrx |
|
|
-26 |
dB |
|
|
Receiver Power (OMA), each Lane |
|
– |
– |
-4 |
dBm |
|
|
Receive Electrical 3 dB upper Cutoff Frequency, each Lane |
|
|
|
12.3 |
GHz |
|
|
LOS De-Assert |
LOSD |
|
|
-25 |
dBm |
|
|
LOS Assert |
LOSA |
-35 |
|
|
dBm |
|
|
LOS Hysteresis |
LOSH |
0.5 |
|
|
dB |
|
Note
1. 12dB Reflection
Order information
|
Product Number |
Data Rate (Gb/s) |
Wavelength (nm) |
Reach (km) |
Temperature (℃) |
|
FQ-40G-ER4+ |
40 |
CWDM 4 |
60 |
0~70 |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks FT-81系列产品线，详细信息，请联系我们的销售人员，谢谢！Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.
