Mellanox — Mellanox MC2210128-004 Compatible 4m 40Gb QSFP+ passive copper cable significantly reduces power consumption and EMI emission, eliminating the use of EDC hosts.
产品详情
| 产品参数 — F-tone | |||
| Mellanox Compatible | MC2210128-004 | 制造商名称 | F-tone |
| 接口类型 | QSFP+ to QSFP+ | 传输速率 | 40Gbps |
| 线缆长度 | 4m (13.1ft) | 线规 | AWG 28 |
| 外护套材质 | PVC(OFNR) | 最小弯曲半径 | 38mm |
| 工作温度 | 商业级/工业级/军品级可选 | 协议 | 10/40 Gigabit Ethernet, Fibre Channel |
| Mellanox Compatible | MC2210128-004 | 制造商名称 | F-tone |
| 接口类型 | QSFP+ to QSFP+ | 传输速率 | 40Gbps |
| 线缆长度 | 4m (13.1ft) | 线规 | AWG 28 |
| 外护套材质 | PVC(OFNR) | 最小弯曲半径 | 38mm |
| 工作温度 | 商业级/工业级/军品级可选 | 协议 | 10/40 Gigabit Ethernet, Fibre Channel |
v Fully compatible with IEEE802.3ba and Infiniband QDR specifications
v 40 Gb/s total bandwidth
v 4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbpsdata rates
v 100-ohm differential impedance system
v Single 3.3V power supply, low power consumption <1.5W
v 30 AWG to 24 AWG cable sizes available
v RoHS, QSFP MSA compliant
v Application for Data Center Networking, Networked storage systems, Switches, and Routers
v Compliant InfiniBand Trade Association (IBTA), 40Gigabit Ethernet ( 40G BASE – CR4)
Mellanox MC2210128-004 Compatible 4m 40G QSFP+ Twinax Copper Cable (QSFP+ to QSFP+ DAC Cable, Passive AWG28 4m)
40G QSFP+ Twinax copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. These cables are used for 40GbE and Infiniband standards, to maximize performance. It is fully compliant with QSFP MSA and IBTA (InfiniBand Trade Association). The QSFP+ cables support the bandwidth transmission requirements as defined by IEEE802.3ba (40 Gb/s) and Infiniband QDR ( 4×10 Gb/s per channel) specifications.
Quality Assurance
Quality Certification
our advantages
-
Keep In Stock
- Fast Delivery
-
Professional Service
- Technical Support
-
Worry-Free Guarantee
- Shopping Satisfactorily
-
Premium Quality
- High stability
Rigorous Industrial ProductTesting
Optical communication products belong to industrial products,which require high stability and reliability.F-tone adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably
-
Temperature Impact
- High and low temperature cycle,aging test to ensure good temperature characteristics
-
Mechanical Impact
- Mechanicalvibration testing to ensure the stability of products
-
EMI Testing
- Excellent designand rigorous testing ensuregood EMI performance
-
MTBF Testing
- MTBF(Mean Time between Failures)testing ensure high stablility
100% 3rd Party Compatible
F-tone Compatibility Testing Center has most of the mainstream brand switches and devices.Before
shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.
- Coding(EEPROM Programming)
- Testing system
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
