QSFP112-400G-FR1 — F-tone QSFP112-400G-FR1 transceiver modules use for 400 Gigabit Ethernet, via an MTP/MPO-12 connector and link on up to 200m of Single-Mode fiber.
产品详情
| 产品参数 — F-tone | |||
| F-tone型号 | QSFP112-400G-FR1 | 制造商名称 | F-tone |
| 封装 | QSFP112 | 传输速率 | 425Gbps |
| 波长 | 1310nm | 最远传输距离 | 2km |
| 调制技术 | PAM4 | 设备要求 | FEC |
| 接口类型 | MTP/MPO-12 | 电压 | 3.3V |
| 线缆类型 | 单模(SMF) | 是否支持DDM | Yes |
| 发射激光器类型 | 1310nm EML | 光接收器件类型 | PIN |
| 发射光功率 | -2.4~+4.0dBm | 接收灵敏度 | < -6.4dBm |
| 工作温度 | 商业级/工业级/军品级可选 | 最大功耗 | < 12W |
| 协议 | QSFP112 MSA, IEEE 802.3bs | 应用 | 400G Ethernet, Data Center Interconnect, Infiniband Interconnects |
| F-tone型号 | QSFP112-400G-FR1 | 制造商名称 | F-tone |
| 封装 | QSFP112 | 传输速率 | 425Gbps |
| 波长 | 1310nm | 最远传输距离 | 2km |
| 调制技术 | PAM4 | 设备要求 | FEC |
| 接口类型 | MTP/MPO-12 | 电压 | 3.3V |
| 线缆类型 | 单模(SMF) | 是否支持DDM | Yes |
| 发射激光器类型 | 1310nm EML | 光接收器件类型 | PIN |
| 发射光功率 | -2.4~+4.0dBm | 接收灵敏度 | < -6.4dBm |
| 工作温度 | 商业级/工业级/军品级可选 | 最大功耗 | < 12W |
| 协议 | QSFP112 MSA, IEEE 802.3bs | 应用 | 400G Ethernet, Data Center Interconnect, Infiniband Interconnects |
v Supports 425Gbps
v Single 3.3V Power Supply
v 4×106.25Gbps (PAM4) electrical interface
v QSFP112 MSA, RoHS Compliant
v Up to 2km over SMF with FEC supported at the Host side
v Maximum power consumption 10.5W
v Supports Data Center Interconnect, 400GBASE FR1, Infiniband interconnects, Enterprise networking
400G QSFP112 FR1 PAM4 Optical Transceiver Module (1310nm MTP/MPO12 SMF 2km with KP4 FEC DDM)
The QSFP112 400GBASE FR1 transceiver module is designed for 400G Ethernet links over 2km of single-mode fiber. The module contains 4 parallel channels at a center wavelength of 1310nm, each operating at 106.25G. On the receiver path, 4 photodiodes and a 4-channel TIA array are used, along with PAM4 re-timers.
Quality Assurance
Quality Certification
our advantages
-
Keep In Stock
- Fast Delivery
-
Professional Service
- Technical Support
-
Worry-Free Guarantee
- Shopping Satisfactorily
-
Premium Quality
- High stability
Rigorous Industrial ProductTesting
Optical communication products belong to industrial products,which require high stability and reliability.F-tone adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably
-
Temperature Impact
- High and low temperature cycle,aging test to ensure good temperature characteristics
-
Mechanical Impact
- Mechanicalvibration testing to ensure the stability of products
-
EMI Testing
- Excellent designand rigorous testing ensuregood EMI performance
-
MTBF Testing
- MTBF(Mean Time between Failures)testing ensure high stablility
100% 3rd Party Compatible
F-tone Compatibility Testing Center has most of the mainstream brand switches and devices.Before
shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.
- Coding(EEPROM Programming)
- Testing system
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
