Fiberdo is the global brand of F-tone Networks

100G CFP2 LR4 Dual Rate 10km Module

100G CFP2 LR4 Dual Rate 10km Module

Features

  • Supports multi-rate (100GE and OTU4); from 103.1Gb/s to 111.8Gb/s aggregate;
  • Up to 10km transmission on SMF;
  • LANWDM laser and PIN receiver with SOA;
  • High speed I/O electrical interface (CAUI-4);
  • MDIO interface with integrated Digital Diagnostic
  • CFP2 MSA package with duplex LC connector;
  • Single +3.3V power supply;
  • Maximum power consumption 12W;
  • Operating case temperature: 0 to +70 °C;
  • Complies with IEEE802.3ba and ITU-T G.959.1;
  • Complies with EU Directive 2015/863/EU;

Application

  • 100GBASE-LR4

CFP2-100G-LR4

100G CFP2 LR4 dual rate 10km Module

Order Information

Part No.

Data Rate

Laser

Fiber Type

Distance

Optical Interface

Temp

DDMI

CFP2-100G-LR4

103.1~111.8Gbps

LWDM

SMF

10km

LC

0~70C

Y

Absolute Maximum Ratings

Parameter

Symbol

Min.

Typical

Max.

Unit

Notes

Storage Temperature

TS

-40

+85

°C

Supply Voltage

VCC

-0.5

+4.0

V

Operating Relative Humidity

FH

+85

%

Recommended Operating Conditions

Parameter

Symbol

Min.

Typical

Max.

Unit

Notes

Operating Case Temperature

TC

0

+70

°C

Power Supply Voltage

VCC

3.13

3.3

3.47

V

Maximum Power Dissipation

PD

12

W

Aggregate Bit Rate

BRAVE

103.125

111.8

Gb/s

Lane Bit Rate

BRLANE

25.78

27.95

Gb/s

Transmission Distance

TD

10

km

Over SMF

Optical Characteristics

Transmitter

Parameter

Symbol

Min.

Typical

Max.

Unit

Notes

Center Wavelength Lane 0

λ0

1294.53

1295.56

1296.59

nm

Center Wavelength Lane 1

λ1

1299.02

1300.05

1301.09

nm

Center Wavelength Lane 2

λ2

1303.54

1304.58

1305.63

nm

Center Wavelength Lane 3

λ3

1308.09

1309.14

1310.19

nm

Total Launch Power, 100GE

PALL

10.5

dBm

1

Total Launch Power, OTU4

PALL

8.9

1

Average Launch Power per Lane, 100GE

PTX_LANE

-4.3

4.5

dBm

1

Average Launch Power per Lane, OTU4

PTX_LANE

-2.5

2.9

dBm

1

OMA per Lane, 100GE

OMA

-1.3

4.5

dBm

1

OMA–TDP per Lane, 100GE

OMA_TDP

-2.3

dBm

Extinction Ratio, 100GE

ER

4

dB

Extinction Ratio, OTU4

ER

7

dB

Difference in launch power between lanes

PTX_DELTA_LANE

5

dB

Average Output Power (Laser Turn off)

POUT-OFF

-30

dBm

Side Mode Suppression Ratio

SMSR

30

dB

Optical Eye Mask, 100GE

{0.25, 0.4, 0.45, 0.25, 0.28, 0.4} Compliant with IEEE 802.3ba

2

Optical Eye Mask, OTU4

{0.25, 0.4, 0.45, 0.25, 0.28, 0.4} Compliant with ITU-T G.959.1

2

Receiver

Parameter

Symbol

Min.

Typical

Max.

Unit

Notes

Center Wavelength Lane 0

λ0

1294.53

1295.56

1296.59

nm

Center Wavelength Lane 1

λ1

1299.02

1300.05

1301.09

nm

Center Wavelength Lane 2

λ2

1303.54

1304.58

1305.63

nm

Center Wavelength Lane 3

λ3

1308.09

1309.14

1310.19

nm

Average Rx Power per Lane, 100GE

PRX _LANE

-10.6

4.5

dBm

OMA Sensitivity per Lane, 100GE

POMA_LANE

-8.6

dBm

3

Average Rx Power per Lane, OTU4

PRX_AVE_LANE

-8.8

2.9

dBm

Sensitivity per Lane, OTU4

PRX_AVE_LANE

-10.3

dBm

4

Damage Threshold

Pdamage

5.5

dBm

Receiver Reflectance

FL

-26

dB

Notes:

1. The optical power is launched into SMF.

2. Measured with a PRBS 231-1 test pattern @25.78125/27.952 Gb/s, Hit ratio≤5E-5.

3. Measured with a PRBS 231-1 test pattern @25.78125 Gb/s, BER≤1E-12.

4. Measured with a PRBS 231-1 test pattern @27.952 Gb/s, BER≤5E-5 pre FEC.

Electrical Characteristics

High-Speed Signal: Compliant to CAUI-4 (IEEE 802.3bm)

Low-Speed Signal: Compliant to CFP2 MSA Hardware Specification

Transmitter (Module Input)

Parameter

Symbol

Min.

Typical

Max.

Unit

Notes

Differential Data Input Amplitude

VIN,P-P

85

900

mVpp

Differential Termination Mismatch

10

%

Tx_Disable

Normal Operation

VIL

-0.3

0.8

V

Laser Disable

VIH

2.0

VCC+0.3

V

Receiver (Module Output)

Parameter

Symbol

Min.

Typical

Max.

Unit

Notes

Differential Data Output Amplitude

VOUT,P-P

200

900

mVpp

Differential Termination Mismatch(1MHZ)

10

%

Output Rise/Fall Time, 20%~80%

TR

12

ps

Rx_LOS

Normal Operation

VOL

0.2

V

Lose Signal

VOH

VCC-0.2

V

Digital Diagnostics

Parameter

Range

Accuracy

Unit

Calibration

Temperature

0 to 70

±3

ºC

Internal

Voltage

0 to VCC

±3%

V

Internal

Tx Bias Current Per Lane

0 to 100

±10%

mA

Internal

Tx Output Power Per Lane

-4.3 to 4.5

±3

dBm

Internal

Rx Power (Each Lane)

-10.6to 4.5

±3

dBm

Internal

Mechanical Dimension

工作温度:商业级/工业级/军品级可选


本产品为 北亿纤通 | F-tone Networks FT-81系列产品线,详细信息,请联系我们的销售人员,谢谢!Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.

Scroll to Top