Features
- Supports 100GBASE-ER1-40 BIDI
- Lane signaling rate 106.25Gb/s with PAM4
- Up to 40km transmission on SMF
- EML laser and APD receiver
- 4×25.78Gb/s with NRZ electrical interface (CAUI-4)
- High speed I/O electrical interface
- I2C interface with integrated Digital Diagnostic monitoring
- QSFP28 MSA package with simplex LC connector
- Single +3.3V power supply
- Maximum power consumption 4.5 W
- Operating case temperature: 0 to +70 °C
- Compliant to 802.3cu, SFF-8636&SFF-8679 standard
- Complies with EU Directive 2015/863/EU
Application
- 100GBASE-ER1-40 BIDI
FQ-100GBD40-T1304/ FQ-100GBD40-T1309
100Gbps QSFP28 BIDI Single Lambda Transceiver, 1304nm/1309nm Single Mode, 40km Reach
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Typical |
Max |
Units |
Notes |
|
Storage Temperature |
TS |
-40 |
|
+85 |
degC |
|
|
Supply Voltage |
VCC |
-0.5 |
– |
+4.0 |
V |
|
|
Operating Relative Humidity |
FH |
– |
– |
+85 |
% |
|
Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typical |
Max |
Units |
Notes |
|
Operating Case Temperature |
Tc |
0 |
|
70 |
°C |
|
|
Power Supply Voltage |
VCC |
3.13 |
3.3 |
3.47 |
V |
|
|
Power Supply Current |
ICC |
– |
– |
1.3 |
A |
|
|
Maximum Power Dissipation |
PD |
– |
– |
4.5 |
W |
|
|
Data Rate(optical) |
DRo |
– |
106.25 |
– |
Gb/s |
|
|
Transmission Distance |
TD |
– |
– |
40 |
km |
Over SMF |
Optical Characteristics
|
Transmitter |
|||||||
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
|
|
Center Wavelength |
FQ-100GBD40-T1304 |
CW |
1303.54 |
1304.58 |
1305.63 |
nm |
|
|
FQ-100GBD40-T1309 |
CW |
1308.09 |
1309.14 |
1310.19 |
|
|
|
|
Average Launch Power |
PTX |
1.7 |
– |
7.1 |
dBm |
1 |
|
|
Outer Optical Modulation Amplitude |
OMA |
4.5 |
– |
7.9 |
dBm |
TEDCQ<1.4 |
|
|
3.3+TDECQ |
– |
dBm |
TEDCQ>1.4 |
||||
|
Transmitter and dispersion eye closure for PAM4 (TDECQ) (max) |
TDECQ |
– |
– |
3.9 |
dBm |
|
|
|
|TDECQ-TECQ| (max) |
– |
– |
– |
2.7 |
dB |
|
|
|
Average Output Power (Laser Turn off) |
P0UT-OFF |
– |
– |
-15 |
dBm |
|
|
|
Side Mode Suppression Ratio |
SMSR |
30 |
– |
– |
dB |
|
|
|
Extinction Ratio |
ER |
6 |
– |
– |
dB |
|
|
|
Receiver |
|||||||
|
Center Wavelength |
FQ-100GBD40-T1304 |
CW |
1308.09 |
1309.14 |
1310.19 |
nm |
|
|
FQ-100GBD40-T1309 |
1303.54 |
1304.58 |
1305.63 |
|
|
||
|
Damage threshold |
Pdamage |
-2.4 |
– |
– |
dBm |
2 |
|
|
Average Rx Power |
PRX |
-16.0 |
– |
-3.4 |
dBm |
3 |
|
|
Receive power_OMAouter |
POMA |
– |
– |
-2.6 |
dBm |
|
|
|
Receiver sensitivity _OMAouter |
SEN _OMA |
– |
– |
-13.8 |
dBm |
4 |
|
|
Los Assert |
LosA |
-26 |
– |
– |
dBm |
|
|
|
Los De-Assert |
LosDA |
– |
– |
-15 |
dBm |
|
|
|
Los Hysteresis |
LosH |
0.5 |
– |
– |
dB |
|
|
Notes:
1. The optical power is launched into SMF.
2. The receiver shall be able to tolerate, without damage, continuous exposure to an optical input signal having this average power level. The receiver does not have to operate correctly at this input power.
3. Average receive power, each lane (min) is informative and not the principal indicator of signal strength.
4. Measured with conformance test signal at TP3 using the test pattern PRBS31Q or scrambled idle for stressed receiver sensitivity for the BER= 2.4×10-4.
Electrical Characteristics
|
Transmitter (Module Input) |
||||||
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
|
Input Differential Impedance |
Rin |
– |
100 |
– |
Ohm |
|
|
Differential Data Input Amplitude |
VIN,P-P |
80 |
– |
900 |
mVpp |
|
|
Differential termination mismatch(max) |
D-mismatch |
– |
– |
10 |
% |
|
|
DC common-mode input voltage |
|
-0.3 |
– |
2.8 |
V |
|
|
Transition time (20%~80%) |
TrTf |
10 |
– |
– |
ps |
|
|
LPMode, Reset and ModSelL/Txdis |
VIL |
-0.3 |
– |
0.8 |
V |
|
|
LPMode, Reset and ModSelL/Txdis |
VIH |
2.0 |
– |
VCC+0.3 |
V |
|
|
Receiver (Module Output) |
||||||
|
Output Differential Impedance |
Rout |
– |
100 |
– |
Ohm |
|
|
Differential Data Output Amplitude |
VOUT.P-P |
– |
– |
900 |
mVpp |
|
|
Differential termination mismatch(max) |
D-mismatch |
– |
– |
10 |
% |
|
|
Transition time, 20%to80% |
TrTf |
12 |
– |
|
ps |
|
|
ModPrsL and IntL/ Rx los |
VOL |
0 |
– |
0.4 |
V |
|
|
ModPrsL and IntL/ Rx los |
VOH |
VCC-0.5 |
– |
VCC+0.3 |
V |
|
Digital Diagnostics
|
Parameter |
Range |
Accuracy |
Unit |
Calibration |
|
Temperature |
0 to 70 |
±3 |
ºC |
Internal |
|
Voltage |
0 to VCC |
0.1 |
V |
Internal |
|
Tx Bias Current |
0 to 100 |
10% |
mA |
Internal |
|
Tx Output Power |
1.7 to 7.1 |
±3 |
dBm |
Internal |
|
Rx Power |
-16.0 to -3.4 |
±3 |
dBm |
Internal |
Pin Assignment
Mechanical Dimension
Ordering information
|
Part Number |
Product Description |
|
FQ-100GBD40-T1304 |
100G QSFP28 BIDI Transceiver, TX1304nm/FX1309nm, Simplex LC, 40km, 0~+70°C, with DDM |
|
FQ-100GBD40-T1309 |
100G QSFP28 BIDI Transceiver, TX1309nm/FX1304nm, Simplex LC, 40km, 0~+70°C, with DDM |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks FT-81系列产品线，详细信息，请联系我们的销售人员，谢谢！Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.
