QSFP-100G-ERL-S — Cisco QSFP-100G-ERL-S Compatible 100G QSFP28 ER1 up to 30km over single-mode fiber (SMF) using a wave length of 1310nm via an LC connector.
产品详情
| 产品参数 — F-tone | |||
| 思科兼容型号 | QSFP-100G-ERL-S | 制造商名称 | F-tone |
| 封装 | QSFP28 | 传输速率 | 103.1Gbps |
| 波长 | 1310nm | 最远传输距离 | 30km |
| 接口类型 | 双工 LC | 发射激光器类型 | EML |
| 线缆类型 | 单模(SMF) | 光接收器件类型 | APD |
| 发射光功率 | 0~+5.6dBm | 接收灵敏度 | <-12.5dBm |
| 协议 | 100G Ethernet, MSA Compliant | 工作温度 | 商业级/工业级/军品级可选 |
| 思科兼容型号 | QSFP-100G-ERL-S | 制造商名称 | F-tone |
| 封装 | QSFP28 | 传输速率 | 103.1Gbps |
| 波长 | 1310nm | 最远传输距离 | 30km |
| 接口类型 | 双工 LC | 发射激光器类型 | EML |
| 线缆类型 | 单模(SMF) | 光接收器件类型 | APD |
| 发射光功率 | 0~+5.6dBm | 接收灵敏度 | <-12.5dBm |
| 协议 | 100G Ethernet, MSA Compliant | 工作温度 | 商业级/工业级/军品级可选 |
Supports 100GBASE-ER1-30
Lane bit rate 103.125Gb/s~106.25 Gb/s with PAM4
Up to 30km transmission on SMF
4×25.78Gb/s with NRZ electrical interface (CAUI-4)
Single +3.3V power supply
Maximum power consumption 4.5W
Compliant with SFF-8636&SFF-8679 standard, EU Directive 2015/863/EU
Supports 100GBASE-ER1-30, Data center / Cloud application
Cisco QSFP-100G-ERL-S Compatible 100G-ER1-30 QSFP28 Transceiver Module (1310nm Single Lambda SMF PAM4 30km LC DDM)
The 100G QSFP28 ER1 optical transceiver modules are designed to support 100G Ethernet, suitable for data center links up to 30km over single-mode fiber. The 100G QSFP28 ER1 module is compliant with the 100G-ER1-30 specification of the 100G Lambda MSA. The transmission end converts 4x25G NRZ electrical signals into 1x100G PAM4 optical signals. The reverse receiving side converts 1x 100G PAM4 optical signal to 4x25G NRZ electrical signal.
Quality Assurance
Quality Certification
our advantages
-
Keep In Stock
- Fast Delivery
-
Professional Service
- Technical Support
-
Worry-Free Guarantee
- Shopping Satisfactorily
-
Premium Quality
- High stability
Rigorous Industrial ProductTesting
Optical communication products belong to industrial products,which require high stability and reliability.F-tone adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably
-
Temperature Impact
- High and low temperature cycle,aging test to ensure good temperature characteristics
-
Mechanical Impact
- Mechanicalvibration testing to ensure the stability of products
-
EMI Testing
- Excellent designand rigorous testing ensuregood EMI performance
-
MTBF Testing
- MTBF(Mean Time between Failures)testing ensure high stablility
100% 3rd Party Compatible
F-tone Compatibility Testing Center has most of the mainstream brand switches and devices.Before
shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.
- Coding(EEPROM Programming)
- Testing system
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
