- Unmatched Low Cost, Mini Bypass Mechanical Optical Switch
- Low Optical Distortions
- High Isolation
- High Reliability
- Epoxy-Free Optical Path
Mini Bypass Mechanical Optical Switch
The Mini bypass fiber optic switch,include 2×2, 1×2, 1×1 optical switch, connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The switch has integrated electrical position sensors. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost
Specifications
|
Operating Wavelength |
1260~1620nm(SM) 850nm(MM) |
Insertion Loss |
≤1.0dB |
|
Wavelength Dependent Loss |
≤0.25dB |
Polarization Dependent Loss |
≤0.05dB |
|
Temperature Dependent Loss |
≤0.20dB |
Return Loss |
SM≥50dB MM≥30dB |
|
Cross Talk |
SM≥55dB MM≥35dB |
Switch Time |
≤8ms |
|
Repeatability |
≤±0.02dB |
Durability |
≥107 times |
|
Operating Voltage |
3 or 5V |
Switch Type |
Non-Latching/Latching |
|
Operating Temperature |
－20~＋70℃ |
Storage Temperature |
－40~＋85℃ |
|
Optical Power |
≤500mW |
Dimension |
20.5L×10.0W×8.2H mm |
Pin Configurations
|
Type |
Optical Route |
Electric Drive |
State Sensor |
|||||
|
Pin 1 |
Pin8 |
Pin 2-3 |
Pin3-4 |
Pin5-6 |
Pin 6-7 |
|||
|
2×2 |
Latching |
P1-P4 |
GND |
V＋ |
Close |
Open |
Open |
Close |
|
P1-P3、P2-P4 |
V＋ |
GND |
Open |
Close |
Close |
Open |
||
|
Non-latching |
P1-P4 |
— |
— |
Close |
Open |
Open |
Close |
|
|
P1-P3、P2-P4 |
V＋ |
GND |
Open |
Close |
Close |
Open |
||
|
1×2 |
Latching |
P1-P3 |
GND |
V＋ |
Close |
Open |
Open |
Close |
|
P1-P2 |
V＋ |
GND |
Open |
Close |
Close |
Open |
||
|
Non-latching |
P1-P3 |
— |
— |
Close |
Open |
Open |
Close |
|
|
P1-P2 |
V＋ |
GND |
Open |
Close |
Close |
Open |
||
|
1×1 |
Latching
|
Non-light |
GND |
V+ |
Close |
Open |
Open |
Close |
|
P1-P2 |
V＋ |
GND |
Open |
Close |
Close |
Open |
||
|
Non-latching |
Non-light |
— |
— |
Close |
Open |
Open |
Close |
|
|
P1-P2 |
V+ |
GND |
Open |
Close |
Close |
Open |
||
Mechanical Dimensions (Unit:mm)
Optical Route
|
1×1 Optical Route |
1×2 Optical Route |
2×2 Optical Route |
Ordering Information
|
FT-FSW |
-M- |
-Wavelength- |
-Switch Type- |
-Voltage- |
-Fiber Type- |
-Package- |
-Fiberlength- |
-Connector- |
|
|
1×1 1x2B 2x2B |
1060＝1 C＋L＝2 1310＝3 1410＝4 1550＝5 650＝6 780＝7 1260-1610=A 1310/1550＝9 850=8 Special＝0 |
Latching＝1 Non-latching＝2 MINI Latching＝3 MINI Non-latching＝4 Special＝0 |
3V=3 5V=5 Special＝0 |
SM28=1 50/125=5 62.5/125=6 Special＝0 |
Bare fiber=1 900um tube=3 Special＝0 |
0.25m=1 0.5m=2 1.0m=3 Special＝0 |
None=1 FC/PC=2 FC/APC=3 SC/PC=4 SC/APC=5 ST/PC=6 LC/PC=7 Duplex LC=8 Special＝0 |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks FT-81系列产品线，详细信息，请联系我们的销售人员，谢谢！Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.
