40G QSFP+ BIDI optical transceiver module is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 40 Gigabit Ethernet connectivity.
40GBASE-SR Bi-Directional QSFP28 850/900nm 100m DDM LC MMF Optical Transceiver Module
The QSFP-40G-SRBD is a Four-Channel, Pluggable, LC Duplex, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high-performance module for short-range duplex data communication and interconnect applications. It integrates four electrical data lanes in each direction into transmission over a single LC duplex fiber optic cable. Each electrical lane operates at 10.3125 Gbps and conforms to the 40GE XLPPI interface.
The QSFP-40G-SRBD transceiver internally multiplexes an XLPPI 4x10G interface into two 20Gb/s electrical channels, transmitting and receiving each optically over one simplex LC fiber using bi-directional optics. This results in an aggregate bandwidth of 40Gbps into a duplex LC cable. This allows reuse of the installed LC duplex cabling infrastructure for 40GbE application.
Link distances up to 100 m using OM3 and 150m using OM4 optical fiber are supported. These modules are de- signed to operate over multimode fiber systems using a nominal wavelength of 850nm on one end and 900nm on the other end. The electrical interface uses a 38 contact QSFP+ type edge connector. The optical interface uses a conventional LC duplex connector. This module incorporates proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features
- Compliant to the 40GbE XLPPI electrical specification per IEEE 802.3ba-2010
- Compliant to QSFP+ SFF-8436 Specification
- Power Level 4: Max Power 3.5W
- Class 1M Eye Safety
- High port density: 21mm horizontal port pitch
- Operates at 10.3125 Gbps per electrical channel with 64b/66b encoded data
- Links up to 100m using OM3 and 150m using OM4 optical fiber
- +10 to +70ºC case temperature operating range
- Hot pluggable transceiver for ease of installation and servicing
- Two wire Serial (TWS) Management Interface with maskable interrupts for expanded functionality
- Utilizes a standard LC duplex fiber cable allowing reuse of existing cable infrastructure
Order information
|
Product Number |
Data Rate (Gb/s) |
Wavelength (nm) |
Reach (m) |
LD |
Tx Power (dBm) |
PD |
Rx Sens (dBm) |
Temperature (℃) |
|
QSFP-40G-SRBD |
40 |
850/900nm |
100M for OM3 150m for OM4 |
VCSEL |
-4~ 5dBm |
PIN |
<-7.5dBm |
10~70 |
工作温度：商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks FT-81系列产品线，详细信息，请联系我们的销售人员，谢谢！Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.
