
40G QSFP+ SR4 100m 850nm MPO Optical Transceiver,support 40Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on.
Features
- 4 independent full-duplex channels
- Up to 10.5Gbps data rate per channel
- MTP/MPO optical connector
- QSFP MSA (SFF-8436) compliant
- Digital diagnostic capabilities
- Capable of over 100m transmission on OM3
- multi-mode fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0~70C
- XLPPI electric interface (with 1.5W Max power)
- RoHS-6 compliant
40G QSFP+ SR4 100m 850nm MPO Optical Transceiver
QSFP+ 40G SR4 Transceiver module is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module. It provides increased port density and total system cost savings. The QSFP full -duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters of OM3 multi-mode fiber.
An optical fiber cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2 -wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information.
The FQ-40G-SR4 is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (SFF-8436). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two -wire serial interface.
Absolute Maximum Ratings*Note4
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
StorageTemperature |
Tst |
-20 |
85 |
degC |
|
RelativeHumidity (non-condensation) |
FH |
– |
85 |
% |
|
Supply Voltage |
VCC |
-0.5 |
3.6 |
V |
|
Voltage on LVTTL Input |
Vilvttl |
-0.5 |
VCC+0.5 |
V |
|
LVTTL Output Current |
Lolvttl |
– |
15 |
mA |
|
Voltage on Open Collector Output |
Voco |
0 |
6 |
V |
Note4: Exceeding any one of these values may destroy the device permanently.
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Operating Case Temperature |
Topc |
-5 |
– |
70 |
C |
|
Power Supply Voltage |
VCC |
3.1 |
– |
3.5 |
V |
|
Power Supply Current |
ICC |
– |
– |
350 |
mA |
|
Total Power Consumption (XLPPI) |
– |
– |
1.5 |
W |
|
|
Fiber Length:2000 MHz ∙ km 50μm MMF (OM3) |
0.5 |
– |
100 |
m |
|
|
Fiber Length:4700 MHz ∙ km 50μm MMF (OM4) |
0.5 |
– |
150 |
m |
Performance Specifications – Electrical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Data Rate, each Lane |
|
– |
10.3125 |
10.5 |
Gbps |
|
|
Power Consumption (XLPPI) |
|
– |
– |
1.5 |
W |
|
|
Supply Current |
ICC |
– |
0.75 |
1.0 |
A |
|
|
Control I/O Voltage,High |
VIH |
2.0 |
– |
VCC |
V |
|
|
Control I/O Voltage, Low |
VIL |
0 |
– |
0.7 |
V |
|
|
Inter-Channel Skew |
TSK |
– |
– |
150 |
ps |
|
|
Transceiver Power On Initialization Time |
Tporinit |
– |
– |
2000 |
ms |
|
|
FESETL Duration |
– |
|
10 |
– |
us |
|
|
FESETL De-assert time |
– |
|
– |
100 |
ms |
|
|
Power on time |
– |
|
– |
100 |
ms |
|
|
Transmitter (XLPPI) |
|
|||||
|
AC Common mode Voltage Tolerance (FMS) |
– |
15 |
– |
– |
mV |
|
|
Tx Input Diff Voltage |
VI |
90 |
– |
1600 |
mV |
|
|
Tx Input Diff Impedance |
ZIN |
80 |
100 |
120 |
|
|
|
Differential Input Return Loss |
|
See IEEE 802.3ba 86A.4.11 |
|
dB |
10MHz- 11.1GHz |
|
|
Eye MaskCoordinates {X1,X2 Y1,Y2} |
|
0.1, 0.31, 95, 350 |
|
UI |
mV |
|
|
Receiver (XLPPI) |
||||||
|
AC Common mode Voltage Tolerance (FMS) |
– |
– |
– |
7.5 |
mV |
|
|
Differential Output Return Loss |
See IEEE 802.3ba 86A.4.2.1 |
|
dB |
10MHz- 11.1GHz |
||
|
Common-mode Output Return Loss |
See IEEE 802.3ba 86A.4.2.2 |
|
dB |
10MHz- 11.1GHz |
||
|
Rx Output Diff Voltage |
Vo |
– |
600 |
800 |
mV |
|
|
Rx Output Rise and Fall Time |
Tr/Tf |
|
|
35 |
ps |
20% to 80% |
|
Eye MaskCoordinates {X1,X2 Y1,Y2} |
|
0.29, 0.5,150, 425 |
|
UI |
mV |
|
Performance Specifications – Optical
|
Parameter |
Symbol |
Min |
Typ. |
Max |
Unit |
||
|
Center Wavelength |
λt |
840 |
850 |
860 |
nm |
||
|
FMS Spectral Width |
Pm |
– |
|
0.65 |
nm |
||
|
Average Optical Power, each Lane |
Pavg |
-7.6 |
– |
+1 |
dBm |
||
|
Optical Modulation Amplitude(OMA) |
Poma |
-6 |
– |
+3 |
dBm |
||
|
TDP,each Lane |
|
– |
– |
4 |
dB |
||
|
Extinction Ratio |
ER |
3 |
– |
– |
dB |
||
|
Relative Intensity Noise |
Rin |
– |
– |
-128 |
dB/Hz |
||
|
Optical Return Loss Tolerance |
|
– |
– |
12 |
dB |
||
|
Transmitter Eye Mask Definition |
|
Complied with IEEE802.3ba |
|
|
|||
|
Average Launch Power OFF Transmitter, each Lane |
Poff |
– |
– |
-30 |
dBm |
||
|
Receiver |
|||||||
|
Center Wavelength |
Λr |
830 |
850 |
860 |
nm |
||
|
Average Power at Receiver Input,each Lane |
|
-9.5 |
– |
2.4 |
dBm |
||
|
Receiver Reflectance |
|
– |
– |
-12 |
dB |
||
|
Los Assert |
LosA |
-30 |
– |
– |
dBm |
||
|
Los Dessert |
LosD |
– |
– |
-14 |
dBm |
||
|
Los Hysteresis |
LosH |
0.5 |
– |
– |
dB |
||
Order information
|
Product Number |
Data Rate(Gb/s) |
Wavelength(nm) |
Reach(m) |
LD |
Tx Power(dBm) |
PD |
Rx Sens(dBm) |
Temperature(℃) |
|
FQ-40G-SR4 |
40 |
850nm |
OM3:100M OM4:150M |
VCSEL |
-7.6~1.0 |
PIN |
<-9.5 |
0~70 |
工作温度:商业级/工业级/军品级可选
本产品为 北亿纤通 | F-tone Networks FT-81系列产品线,详细信息,请联系我们的销售人员,谢谢!Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Andxe System before they become applicable to any particular order or contract. In accordance with the Andxe System policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of Andxe System or others. Further details are available from any Andxe System sales representative.











