Fiberdo is the global brand of F-tone Networks

QSFP+ 40G LR4 10km 工业级光模块 | FTCQ-4X-LR4I-GC

QSFP+ 40G LR4 10km 工业级光模块 | FTCQ-4X-LR4I-GC

产品概述

FTCQ-4X-LR4I-GC 是北亿纤通国产系列 QSFP+ 封装 40Gb/s LR4 光收发模块,遵循 QSFP+ LR4 规范。模块将 4 路 10Gb/s 级电信号转换为 4 路 LAN-WDM 光信号(中心波长 1271/1291/1311/1331nm)复用到一根单模光纤中传输,接收端解复用并还原为电信号,在单模光纤上最大链路长度为 10km。模块工作温度范围 -40~+85℃,适用于工业级应用环境,功耗不超过 3.5W,支持数字诊断监控。

工作温度:商业级/工业级/军品级可选

产品特性

  • 4 路 LAN-WDM 发射,中心波长 1271/1291/1311/1331nm,单模光纤传输可达 10km
  • 40Gb/s QSFP+ 热插拔封装,双工 LC 光接口
  • 工业级设计,适应严苛环境应用
  • 功耗不超过 3.5W
  • 每通道接收灵敏度(OMA)-11.5dBm,消光比不低于 3.5dB
  • 支持数字诊断监控(DDM),符合 RoHS 环保要求

应用场景

  • 40GBASE-LR4 以太网链路
  • 数据中心与城域网 10km 单模互连
  • 工业级环境下的 40G 光传输

技术规格

参数 符号 最小值 典型值 最大值 单位
数据速率 Data Rate – – 40 Gb/s
通道波长 Lane Wavelength 1264.5 1271/1291/1311/1331 1337.5 nm
传输距离 Distance – – 10 km
工作温度 Tc -40 – 85 ℃
电源电压 VCC 3.13 3.3 3.47 V
功耗 Power – – 3.5 W
消光比 ER 3.5 – – dB
接收灵敏度(OMA,每通道) Sen – – -11.5 dBm

本产品为北亿纤通产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

需要选型建议或报价?

告诉我们您的应用场景与需求,获取适配的光通信产品方案。

获取方案与报价浏览产品中心
fiberdo.com光模块 · 光通信解决方案
由四川眸科科技有限公司运营
F-tone/北亿纤通 授权代理

产品分类

快速导航

Scroll to Top