Fiberdo is the global brand of F-tone Networks

10G SFP+ 无源铜缆直连线 | FT-77-CAB-10GSFP-PxM

10G SFP+ 无源铜缆直连线 | FT-77-CAB-10GSFP-PxM

产品概述

FT-77-CAB-10GSFP-PxM 是北亿纤通推出的 10G SFP+ 无源直连铜缆组件(Passive DAC),支持 10Mbps 至 12Gbps 数据速率,长度覆盖 0.5m 至 7m。无源设计在线缆内无信号放大,最大功耗仅 0.03W,铜缆本身兼具散热作用;主机端配合电子色散补偿(EDC)可进一步延长传输距离。产品符合 SFF-8431 规范,内置 EEPROM 签名便于主机识别,提供 24/26/30AWG 线规可选,是机架内与机架间短距应用的经济型互连方案。

工作温度:商业级/工业级/军品级可选

产品特性

  • 符合 SFF-8431 规范
  • 支持 10Mbps 至 12Gbps 数据速率
  • 无源设计,最大功耗仅 0.03W,铜缆兼具散热作用
  • 长度覆盖 0.5~7m,提供 24/26/30AWG 线规可选
  • 主机 EDC 补偿可延长传输距离
  • EEPROM 签名便于主机识别线缆类型
  • 100Ω 差分阻抗,AC 耦合输入输出
  • RoHS 合规,拉环式锁扣设计

应用场景

  • 10G 以太网与千兆以太网(IEEE 802.3ae)
  • 光纤通道(1/2/4/8/10GFC)
  • InfiniBand SDR/DDR/QDR
  • FCoE(以太网光纤通道)
  • 机架内及机架间短距互连
  • 串行数据传输

技术规格

参数 符号 最小值 典型值 最大值 单位
数据速率 – 0.010 – 10.3125 Gbps
线缆长度 – 0.5 – 7 m
输入电压 VccT/VccR 3.135 3.3 3.465 V
最大功耗 – – – 0.03 W
最大平均电流 Icc – – 10 mA
I2C 时钟频率 fSCL – – 400 kHz
特征阻抗 – 95 100 105 Ω
线缆插入损耗 – – – 10 dB/10m
插拔耐久 – – – 50 cycles

本产品为北亿纤通产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

Scroll to Top