Fiberdo is the global brand of F-tone Networks

100GBASE-LR4 CFP 10km 光接收模块 | FTC1-HG-LR4R

100GBASE-LR4 CFP 10km 光接收模块 | FTC1-HG-LR4R

产品概述

FTC1-HG-LR4R是一款100GBASE-LR4 CFP光接收模块(纯接收型),采用热插拔CFP封装形式,专为高速光网络应用设计。模块内置1310nm波段PIN ROSA(无TOSA),将4路LAN-WDM 25.78Gb/s光输入信号转换为10路10.3Gb/s电数据流,电接口完全符合802.3ba CAUI规范。模块符合CFP MSA与IEEE 802.3ba 100GBASE-LR4规范,兼容OTU4应用,支持10km单模光纤链路,单3.3V供电,功耗低于6W。

工作温度:商业级/工业级/军品级可选

产品特性

  • CFP MSA兼容,符合IEEE 802.3ba 100GBASE-LR4规范
  • 纯接收型设计,内置1310nm波段PIN ROSA
  • 工作光数据速率最高112Gbps,4路25.78Gb/s光输入转10路10.3Gb/s电输出
  • 兼容OTU4应用
  • 10路并行电串行接口,CML信号AC耦合,支持25cm FR4走线
  • 支持热插拔电接口
  • 低功耗设计,功耗低于6W,单3.3V供电
  • 符合RoHS6标准,商业级/工业级温度版本可选

应用场景

  • 100GbE交换机互联
  • OTN-OTU4传输
  • 交换机到交换机接口
  • 交换机到路由器接口
  • 数据中心核心网络

技术规格

参数 符号 最小值 典型值 最大值 单位
产品型号 – – FTC1-HG-LR4R – –
数据速率 – 103.125 – 112 Gb/s
传输距离 – – 10 – km
接收通道波长 λ 1294.53 – 1310.19 nm
单通道接收灵敏度(OMA) Pmin – – -8.6 dBm
单通道接收过载光功率 Pmax – – +4.5 dBm
功耗 Pw – – <6 W
供电电压 Vcc 3.2 3.3 3.4 V
工作壳温 Tc 0 – 70 ℃

本产品为北亿纤通产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

Scroll to Top