Fiberdo is the global brand of F-tone Networks

QSFP+ 40G SR4 150m 光模块(工业级) | QSFP-40G-SR4IZ

QSFP+ 40G SR4 150m 光模块(工业级) | QSFP-40G-SR4IZ

产品概述

QSFP-40G-SR4IZ 是高性能、低成本 40Gbps QSFP+ SR4 光收发一体模块,支持 40Gbps 数据速率与多模光纤传输。模块由 4 通道 850nm VCSEL 阵列、4 通道 PIN 光电探测器阵列与 MCU 控制单元三部分组成,满足 Class I 激光安全要求,兼容 IEEE 802.3ba 40GBASE-SR4 标准与 SFF-8436 规范。OM3 多模光纤最大链路长度 100m,OM4 多模光纤 150m。单 +3.3V 供电,工业级工作温度 -40~+85℃,支持实时数字诊断监控。

工作温度:商业级/工业级/军品级可选

产品特性

  • 4 通道全双工收发一体模块,单通道 10.3125Gb/s
  • 4 通道 850nm VCSEL 阵列发射
  • 4 通道 PIN 光电探测器阵列接收
  • 单 MPO 光接口,热插拔 QSFP+ 封装
  • OM3 多模 100m、OM4 多模 150m 传输
  • 兼容 IEEE 802.3ba 40GBASE-SR4 与 SFF-8436 规范
  • Class I 激光安全,实时数字诊断监控
  • 典型功耗 1.5W,单 +3.3V 供电

应用场景

  • 40GBASE-SR4 以太网
  • 交换机、路由器与 HBA
  • Infiniband 4 通道 SDR/DDR/QDR 传输
  • 高性能背板应用
  • 私有协议应用

技术规格

参数 符号 最小值 典型值 最大值 单位
传输距离(OM3 多模) – – – 100 m
传输距离(OM4 多模) – – – 150 m
单通道速率 – – 10.3125 – Gb/s
中心波长 λc 840 850 860 nm
每通道平均发射光功率 Pout -7.6 – 2.4 dBm
消光比 ER 3.0 – – dB
接收机每通道平均输入光功率 – -9.5 – 2.4 dBm
典型功耗 Pm – 1.5 – W
供电电压 Vcc 3.135 3.3 3.465 V

本产品为北亿纤通产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

Scroll to Top