Fiberdo is the global brand of F-tone Networks

LCC 2×1.25G 850nm 双发双收并行光模块 | FTPL-2TR12-02I-GC

LCC 2x1.25G 850nm 双发双收并行光模块 | FTPL-2TR12-02I-GC

产品概述

FTPL-2TR12-02I-GC 是一款超小尺寸、超低功耗、高性能、高可靠的双发双收一体光模块。模块采用金属外壳,电接口使用焊接式 LCC 封装,光接口使用 MT 尾纤;收发的中心波长均为 850nm,3.3V 单电源供电,单通道传输速率为 1.25Gbps,具备 I2C 通信功能。主要应用于高速光互联、服务器与存储器阵列互联。

工作温度:商业级/工业级/军品级可选

产品特性

  • 2 路 850nm 光发射、2 路 850nm 光接收
  • 4 芯 MT 接口尾纤,32pin LCC 封装
  • 单通道传输速率 1.25Gbps
  • 结构尺寸仅 14mm×11.5mm×3.5mm
  • 3.3V 单电源供电,功耗低于 0.9W
  • 具备 I2C 通信与数字监控功能
  • 接收信号检测(SD)与发送/接收使能引脚
  • 告警信号输出
  • 金属外壳,高可靠性

应用场景

  • 高速光互联
  • 服务器与存储器阵列互联
  • 数据中心短距光互联
  • 板载光互联应用

技术规格

参数 符号 最小值 典型值 最大值 单位
单通道速率 S – 1.25 – Gbps
平均发送光功率(单通道) Po -4 – 2 dBm
中心波长 λ 840 850 860 nm
消光比 ER 3 – – dB
接收灵敏度 PinMIN – – -10 dBm
饱和光功率 Pin(SAT) 1 – – dBm
差分信号输出电压 Vdiff-out 300 400 800 mV
工作电流 Icc – – 260 mA

本产品为北亿纤通产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

Scroll to Top