Fiberdo is the global brand of F-tone Networks

SFP 10G CWDM 发射1270nm 接收850nm 光模块 | FTCS-C271X-DZ01I

SFP 10G CWDM 发射1270nm 接收850nm 光模块 | FTCS-C271X-DZ01I

产品概述

FTCS-C271X-DZ01I 是北亿纤通工业级 SFP 封装光模块,物料规格为 RX850/TX1270 CWDM 光模块,传输速率 10Gbps。发射工作波长 1270nm(单模光纤),接收工作波长 840~850nm(多模光纤),收发均为 LC 接口。平均输出光功率 0~+5dBm,接收灵敏度≤-11dBm,3.3V 供电,工业级质量等级,支持 -40~+85℃ 工作温度范围。

工作温度:商业级/工业级/军品级可选

产品特性

  • SFP 标准封装,RX850/TX1270 CWDM 规格,10Gbps 传输速率
  • 发射波长 1270nm(单模),接收波长 840~850nm(多模)
  • 平均输出光功率 0~+5dBm,接收灵敏度≤-11dBm,饱和光功率≥-1dBm
  • 收发双 LC 光接口,CML 电接口电平
  • LOS 信号丢失告警监测,TTL 电平指示
  • 3.3V 供电,工业级质量等级,非湿敏元器件
  • 误码率测试要求≤10⁻¹⁰(10Gbps,码型 2¹⁵-1)

应用场景

  • 10G 光通信接入传输
  • 工业级光纤通信系统
  • 企业网与城域网互联
  • 单纤双向/双纤光链路

技术规格

参数 符号 最小值 典型值 最大值 单位
传输速率 – – 10 – Gbps
发射工作波长 – – 1270 – nm
接收工作波长 – 840 – 850 nm
平均输出光功率 – 0 – 5 dBm
接收灵敏度 – – – -11 dBm
饱和光功率 – -1 – – dBm
工作电压 – – 3.3 – V
光接口(收/发) – – LC/LC – –
误码率 BER – – 1E-10 –

本产品为北亿纤通产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

需要选型建议或报价?

告诉我们您的应用场景与需求,获取适配的光通信产品方案。

获取方案与报价浏览产品中心
fiberdo.com光模块 · 光通信解决方案
由四川眸科科技有限公司运营
F-tone/北亿纤通 授权代理

产品分类

快速导航

Scroll to Top